|
|
|
|
|
|
|
|
|
|
|
Tabletop drilling machine
|
|
| Model No.︰ | WD-40 |
| Brand Name︰ | WD Brand |
| Country of Origin︰ | China |
| Unit Price︰ | - |
| Minimum Order︰ | 1 pc |
|
|
|
|
|
|
|
| This machine is designed for drilling, counter boring reaming, tapping, spot facing, etc. The maximum drilling capacity is 40mm on small or middle sized workpieces. It is widely used in machine works and repair shops for single piece or small lot production, having the features of abundant horsepower and high rigidity when compared with all the others of its kind at home and abroad. Feature 1. A wide range of spindle speeds can be obtained by setting two levers at the left side of the spindle head in conjunction with tow-speed switch. 2. It has reasonable speed of revolution, there is well cutting property when it drill the bigger hole. 3. Two-speed switch can also permit the spindle to reversely rotate both at high and low speed so as to perform tapping at any speed. 4. All of the levers are locates on the spindle head for the convenient operation. 5. The spindle unit is equipped with the back moving spring and cutter dismounting device. The former can be adjusted to meet the requiremnet of the operator, and the latter is utilized for easily taking off the cutter. 6. The spindle head can be raised, lowered and revolver 360. The elevating mechanisms are acted through the worm and worm wheel gears and rack, thus saving the operator's labour and ensuring safety in self-locking. 7. The motor is mounted in the spindle head and its stator is fitted in the bushing for positioning the motor to facilitate mounting and dismounting in maintenance and repair. The power is transmitted to speed changing mechanism via splinted shaft. 8. All the essential cast parts have undergone artificial ageing, and the principal steel parts as spindle and its sleeve, clutch, drive gears, have been properly heat-treated. Therefore they are more stable and wear-resistant. Specifications Max. drilling diameter 40 mm Distance from axis of spindle to column generating line 300 mm Max.Distance frome spindle nose to working surface of base 800 mm Max. travel of spindle box 570 mm Max. travel of spindle 150 mm Taper of spindle bore（Morse） Morse No.4 Range of speeds 52 80 105 160 210 260 320 400 530 800 1100 1650 r.p.m Feed steps 12 steps Effective working area of table （L×W） 400×500 mm YD100L1-6/4 Power 1.3/1.8 kw 2-speed 3-phase Voltage 380V A.C. motor Speed 940/1440 r.p.m Overall dimensions （L×W×H） 620×847×2145 mm Net Weight 550 kg |
|
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
|
|
